LexiTopic: Machines, Tools, and Devices

If you cite information from this LexiConnexxions report, please give credit and a link to this page. These reports and analyses are compiled and prepared by a human being, not a machine. Thank you.
The LexiConnexxions analysis has identified these words related to MACHINES, TOOLS, AND DEVICES in the Spelling Bee lexicon. The complete list of words on this topic is shown at right (on laptop or desktop) or at the end of the page (on mobile); the complete topical analysis is given below.
Bee words marked with an asterisk have been used in at least one Spelling Bee puzzle, then subsequently disallowed; they are retained here for historical interest.
ABOUT THE LEXITOPICS PROJECT
Taxonomy for Spelling Bee words related to MACHINES, TOOLS, AND DEVICES
SUBJECT HEADINGS IN THIS LEXITOPIC: Fastening, Tightening, Securing not enclosuresHandles, Knobs, Locks, Latches, and FastenersMachines and MachiningRopes, Chains, and Cables not electric or electronicTools and Devices not farms, not householdUnfastening, Loosening, Detaching, Removing not enclosures
NOTES ABOUT THE TAXONOMY FOR MACHINES, TOOLS, AND DEVICES SCOPE NOTE: This LexiTopic compiles and defines Bee words related to devices, tools, and machines, whether for general or specific use. Words related to household tools and appliances are in FURNISHINGS AND FITMENTS. Words related to farm tools and devices are in AGRICULTURE AND FARM LIFE. Words related to devices and methods for measuring are in MEASURES AND MEASUREMENTS. Words related to timepieces are in TIME. Words related to maintenance and to states of repair and disrepair (in general) are in OBJECTS AND COLLECTIONS.
Topical arrangement of Spelling Bee words related to MACHINES, TOOLS, AND DEVICES
Fastening, Tightening, Securing not enclosures
BEAT: to lodge securely by repeated striking (e.g., to beat a stake into the ground)BEATEN: to lodge securely by repeated striking (e.g., to beat a stake into the ground)BELT: to encircle or fasten with a belt; to strap onBELTING: to encircle or fasten with a belt; to strap onBEND: a knot by which one rope is fastened to another or to some object; also, to fasten (bend a sail to its yard)BENDING: a knot by which one rope is fastened to another or to some object; also, to fasten (bend a sail to its yard)BIND: something that binds; the act of binding: the state of being bound; a place where binding occurs; also, to make secure by tying (His hands were bound with rope.); to tie together (binding the wheat into sheaves); to fasten together (a pin bound the ends of the scarf); to fasten round about (when wreaths of laurel bound them); to wrap around with something so as to enclose or cover (A silk sash bound her waist.)BINDING: the action of one that binds; also, something that binds; also, the act of binding: the state of being bound; a place where binding occurs; a material or device used to bind; also, to make secure by tying (His hands were bound with rope.); to tie together (binding the wheat into sheaves); to fasten together (a pin bound the ends of the scarf); to fasten round about (when wreaths of laurel bound them); to wrap around with something so as to enclose or cover (A silk sash bound her waist.)BOUND: past tense and past participle of bind: something that binds; the act of binding: the state of being bound; a place where binding occurs; also, to make secure by tying (His hands were bound with rope.); to tie together (binding the wheat into sheaves); to fasten together (a pin bound the ends of the scarf); to fasten round about (when wreaths of laurel bound them); to wrap around with something so as to enclose or cover (A silk sash bound her waist.)BOUND: fastened by or as if by a band: confined —often used in combination (desk-bound)BUCKLE: a fastening for two loose ends that is attached to one and holds the other by a catch; also, to fasten with a buckle; to become fastened with a buckleBUNDLING: to make into a bundleCATCH: to fasten (e.g., catch back a curtain)CINCH: a tight grip; also, to fasten (something, such as a belt or strap) tightly (He cinched his belt tight.)CINCHED: a tight grip; also, to fasten (something, such as a belt or strap) tightly (He cinched his belt tight.)CINCHING: a tight grip; also, to fasten (something, such as a belt or strap) tightly (He cinched his belt tight.)CLIP: any of various devices that grip, clasp, or hook; also, to clasp, fasten, or secure with a clip; to clip somethingCLIPPABLE: designed to be fastened with a clipCLIPPED: any of various devices that grip, clasp, or hook; also, to clasp, fasten, or secure with a clip; to clip somethingFIRM: to make secure or fast: to tighten (firming her grip on the racquet, often used with up)FIRMING: to make secure or fast: to tighten (firming her grip on the racquet, often used with up)FIRMLY: to make secure or fast: to tighten (firming her grip on the racquet, often used with up)FIXED: securely placed or fastened: stationary; also, to make firm, stable, or stationary; to become firm, stable, or fixed; to affix, attach (the tables on the ship were fixed to the floor)MOOR: to make fast with or as if with cables, lines, or anchors: to anchor; to be made fastMOORING: a place where or an object to which something (such as a craft) can be moored; also, a device (such as a line or chain) by which an object is secured in place; also, to make fast with or as if with cables, lines, or anchors: to anchor; to be made fastNAIL: to fasten with or as if with a nailNAILING: to fasten with or as if with a nailPEGGED: to pin down: to restrictPEGGING: to pin down: to restrictPINNED: to hold fast or immobile (pinned under the wreckage)PINNING: to hold fast or immobile (pinned under the wreckage) REEVE: to pass (something, such as a rope) through a hole or opening; to fasten by passing through a hole or around something; to pass a rope through; also, of a rope: to pass through a block or similar deviceROVE: past tense and past participle of reeve: to pass (something, such as a rope) through a hole or opening; to fasten by passing through a hole or around something; to pass a rope through; also, of a rope: to pass through a block or similar deviceTIED: to fasten, attach, or close by means of a tie; to make by tying constituent elements (tied a wreath, tie a fishing fly); to make a tie; to close by means of a tieTUCK: something tucked or to be tucked in; also, an act or instance of tucking; also, to push in the loose end of so as to hold tightly (tuck in your shirt); to pull up into a fold; to draw together into tucks or folds; to fit snuglyTUCKED: something tucked or to be tucked in; also, an act or instance of tucking; also, to push in the loose end of so as to hold tightly (tuck in your shirt); to pull up into a fold; to draw together into tucks or folds; to fit snuglyTYING: to fasten, attach, or close by means of a tie; to make by tying constituent elements (tied a wreath, tie a fishing fly); to make a tie; to close by means of a tieWHIP: to wind or wrap around something; to bind or wrap (something, such as a rope or fishing rod) with cord for protection and strengthWHIPPING: material used to whip or bind; also, to wind or wrap around something; to bind or wrap (something, such as a rope or fishing rod) with cord for protection and strengthWIND: a particular method of winding; also, to encircle or cover with something pliable: to bind with loops or layersWINDING: material (such as wire) wound or coiled about an object (such as an armature); also: a single turn of the wound material; also, the act of one that winds; the manner of winding something; also, a particular method of winding; also, to encircle or cover with something pliable: to bind with loops or layersWOUND: a particular method of winding; also, to encircle or cover with something pliable: to bind with loops or layers
Handles, Knobs, Locks, Latches, and Fasteners
BARRING: to fasten with a long, narrow piece of wood, metal, or other material: to fasten with a barBOLT: a metal rod or pin for fastening objects together that usually has a head at one end and a screw thread at the other and is secured by a nut; also, to attach or fasten with boltsBRAD: a thin nail of the same thickness throughout but tapering in width and having a slight projection at the top of one side instead of a head: a slender wire nail with a small barrel-shaped head; also, to fasten with bradsCATCH: something that checks or holds immovable (a safety catch); also, to fasten (e.g., catch back a curtain)CLIP: any of various devices that grip, clasp, or hook; also, to clasp, fasten, or secure with a clip; to clip somethingCLIPPABLE: designed to be fastened with a clipCLIPPED: any of various devices that grip, clasp, or hook; also, to clasp, fasten, or secure with a clip; to clip somethingCRAMP: clamp; also, to fasten or hold with a crampDOGGED: to fasten (something) with a dog, any of various usually simple mechanical devices (such as an andiron or a detent) for holding, gripping, or fastening that consist of a spike, bar, or hook (fire dogs, dogged down the hatch)DOGGING: to fasten (something) with a dog, any of various usually simple mechanical devices (such as an andiron or a detent) for holding, gripping, or fastening that consist of a spike, bar, or hook (fire dogs, dogged down the hatch)DOORKNOB: a knob that releases a door latchDROP: a movable plate that covers the keyhole of a lockFOBS: or key fob: an object attached to a key chain or key ring, especially: a small electronic device used typically in place of a key (as to unlock a door or start a vehicle) or to remotely initiate the action of another device (such as a garage door)HINGE: a jointed or flexible device on which a door, lid, or other swinging part turns; also, to swing on or as if on a hinge; also, to attach by or furnish with hingesHINGED: a jointed or flexible device on which a door, lid, or other swinging part turns; also, to swing on or as if on a hinge; also, to attach by or furnish with hingesHINGING: a jointed or flexible device on which a door, lid, or other swinging part turns; also, to swing on or as if on a hinge; also, to attach by or furnish with hingesKNOB: a small rounded ornament or handleLATCH: any of various devices in which mating mechanical parts engage to fasten but usually not to lock something: a fastener (as for a door) consisting essentially of a pivoted bar that falls into a notch; also, a fastener (as for a door) in which a spring slides a bolt into a hole; a night latch, a door lock having a spring bolt operated from the outside by a key and from the inside by a knob; also, to make fast with or as if with a latchLEAF: a part (as of window shutters, folding doors, or gates) that slides or is hingedLOCK: a fastening (as for a door) operated by a key or a combination; also, to fasten the lock of; to make fast with or as if with a lock (lock up the house); to become locked; also, to fasten in or out or to make secure or inaccessible by or as if by means of locks (locked himself away from the curious world)LOCKABLE: a fastening (as for a door) operated by a key or a combination; also, to fasten the lock of; to make fast with or as if with a lock (lock up the house); to become locked; also, to fasten in or out or to make secure or inaccessible by or as if by means of locks (locked himself away from the curious world)LOCKED: a fastening (as for a door) operated by a key or a combination; also, to fasten the lock of; to make fast with or as if with a lock (lock up the house); to become locked; also, to fasten in or out or to make secure or inaccessible by or as if by means of locks (locked himself away from the curious world)LOCKUP: an act of locking: the state of being lockedLOOP: a ring or curved piece used to form a fastening, handle, or catch; also, to fasten with a loopLOOP: a ring or curved piece used to form a fastening, handle, or catch; also, to fasten with a loopLOOPING: a ring or curved piece used to form a fastening, handle, or catch; also, to fasten with a loopLOOPING: a ring or curved piece used to form a fastening, handle, or catch; also, to fasten with a loopNAIL: a slender usually pointed and headed fastener designed to be pounded in; also, to fasten with or as if with a nailNAILING: a slender usually pointed and headed fastener designed to be pounded in; also, to fasten with or as if with a nailPADLOCK: a removable lock with a shackle that can be passed through a staple or link and then securedPICK: a picklock: a tool for picking locks; also, to unlock with a device (such as a wire) other than the key (pick a lock)PICKED: a picklock: a tool for picking locks; also, to unlock with a device (such as a wire) other than the key (pick a lock)PULL: a device for pulling something or for operating by pulling (a drawer pull)RING: a circular band for holding, connecting, hanging, pulling, packing, or sealing (a key ring, a towel ring); also, to provide with a ringRINGING: a circular band for holding, connecting, hanging, pulling, packing, or sealing (a key ring, a towel ring); also, to provide with a ringTACK: a small short sharp-pointed nail usually having a broad flat head; also, to fasten or affix with tacks (tack a notice to a pole, tacking down a stairway carpet)TACKED: a small short sharp-pointed nail usually having a broad flat head; also, to fasten or affix with tacks (tack a notice to a pole, tacking down a stairway carpet)TACKING: a small short sharp-pointed nail usually having a broad flat head; also, to fasten or affix with tacks (tack a notice to a pole, tacking down a stairway carpet)TALON: the shoulder of the bolt of a lock on which the key acts to shoot the boltTAPPED: to form an internal screw thread in by means of a tap, a tool for forming an internal screw threadTAPPING: to form an internal screw thread in by means of a tap, a tool for forming an internal screw threadTHOLE*: a peg, a pinTOED: to drive (something, such as a nail) obliquely; also: to clinch or fasten by or with nails or rods so driven; also, (adj) driven obliquely (a toed nail); also: secured by diagonal or oblique nailingTOGGLE: a piece or device for holding or securing; also, to furnish with a toggle; to fasten with or as if with a toggleTURN: a catch or latch for a cupboard or cabinet door operated by turning a handle; also, to cause to move around so as to effect a desired end (as of locking, opening, or shutting) (turned the knob till the door opened, turned the key in the lock)UNBAR: to remove a bar from: to unbolt, openUNHINGE: to remove from the hinges (unhinge a door)UNHINGED: to remove from the hinges (unhinge a door)UNHINGING: to remove from the hinges (unhinge a door)UNLATCH: to open or loose by lifting the latchUNLOCK: to unfasten the lock of: open the lock on (Can you unlock the car for me?) also, to become unfastened or freed from restraintsWARD: a projecting ridge of metal in a lock casing or keyhole permitting only the insertion of a key with a corresponding notch; also: a corresponding notch in a bit of a key
Machines and Machining
ACTION: an operating mechanism, or the manner in which a mechanism or instrument operatesACTUATE: to put into mechanical action or motionACTUATOR: one that actuates; specifically: a mechanical device for moving or controlling somethingAGITATOR: a device or an apparatus for stirring or shakingALLOWANCE: an allowed dimensional difference between mating parts of a machineARBOR: a spindle or axle of a wheel; a main shaft or beam; a shaft on which a revolving cutting tool is mounted; a spindle on a cutting machine that holds the work to be cutBEAM: engines: an oscillating lever on a central axis receiving motion at one end from an engine connecting rod and transmitting it at the other; also, boom, spar (e.g., the beam of a crane)BELT: a continuous band of tough flexible material for transmitting motion and power or conveying materialsBENCH: a table forming part of a machineBLOCK: the casting that contains the cylinders of an internal combustion engine (engine block)BLOCKS: the casting that contains the cylinders of an internal combustion engine (engine block)BOSS: the hub of a propellerBOWL: a cylindrical roller or drum (as for a machine)CHUCK: an attachment for holding a workpiece or tool in a machine (such as a drill or lathe)CLUTCH: a coupling used to connect and disconnect a driving and a driven part (such as an engine and a transmission) of a mechanism; also, a lever (such as a pedal) operating such a clutch; also, to operate an automobile clutch CLUTCHED: a coupling used to connect and disconnect a driving and a driven part (such as an engine and a transmission) of a mechanism; also, a lever (such as a pedal) operating such a clutch; also, to operate an automobile clutch COGWHEEL: a wheel with cogs, a gearCONTROL: a device or mechanism used to regulate or guide the operation of a machine, apparatus, or systemDRAFT: angle, taper; specifically, industrial engineering: the taper (the gradual diminution of thickness, diameter, or width in an elongated object) given to a pattern or die so that the work can be easily withdrawnENGINE: a machine for converting any of various forms of energy into mechanical force and motion; also: a mechanism or object that serves as an energy sourceFACEPLATE: a disk fixed with its face at right angles to the live spindle of a lathe for the attachment of the work; also, a protective plate for a machine or device GALL: to fret and wear away by friction: to chafe (the galling of a metal bearing); also, to seize, to cohere to a relatively moving part through excessive pressure, temperature, or friction —used especially of machine parts (such as bearings, brakes, or pistons); to fail to operate due to the seizing of a part —used of an engineGALLED: to fret and wear away by friction: to chafe (the galling of a metal bearing); also, to seize, to cohere to a relatively moving part through excessive pressure, temperature, or friction —used especially of machine parts (such as bearings, brakes, or pistons); to fail to operate due to the seizing of a part —used of an engineGALLING: to fret and wear away by friction: to chafe (the galling of a metal bearing); also, to seize, to cohere to a relatively moving part through excessive pressure, temperature, or friction —used especially of machine parts (such as bearings, brakes, or pistons); to fail to operate due to the seizing of a part —used of an engineGANTRY: a platform made to carry a traveling crane and supported by towers or side frames running on parallel tracksGLAND: a device for preventing leakage of fluid past a joint in machinery, or the movable part of a stuffing box by which the packing is compressedGUARD: a protective or safety device, specifically: a device for protecting a machine part or the operator of a machineHEAD: a part or attachment of a machine or machine tool containing a device (such as a cutter or drill); also: the part of an apparatus that performs the chief function or a particular function (e.g., a drill head)HITTING: of an internal combustion engine: to fire a quantity of mixed fuel and air in the cylinders (the engine wouldn't hit)HOOD: an enclosure or canopy provided with a draft for carrying off fumes, sprays, smokes, or dusts; also, a cover for parts of mechanisms; specifically: the movable metal covering over the engine of an automobileHUNT: to oscillate alternately to each side (as of a neutral point) or to run alternately faster and slower —used especially of a device or machineHUNTED: to oscillate alternately to each side (as of a neutral point) or to run alternately faster and slower —used especially of a device or machineJIGGING: to machine by means of a jig-controlled tool operationJOURNAL: the part of a rotating shaft, axle, roll, or spindle that turns in a bearingLATHE: a machine in which work is rotated about a horizontal axis and shaped by a fixed tool; also, to cut or shape with a latheLATHED: a machine in which work is rotated about a horizontal axis and shaped by a fixed tool; also, to cut or shape with a latheLATHING: a machine in which work is rotated about a horizontal axis and shaped by a fixed tool; also, to cut or shape with a latheLINK: an intermediate rod or piece for transmitting force or motion, especially: a short connecting rod with a hole or pin at each endLIVE: imparting or driven by power (a live axle)LUFF: Collins: to raise or lower the jib of a crane [this sense is not in M-W]LUFFS: Collins: to raise or lower the jib of a crane [this sense is not in M-W]MACHINE: a mechanically, electrically, or electronically operated device for performing a task; also, to process by or as if by machine; especially: to reduce or finish by or as if by turning, shaping, planing, or milling by machine-operated toolsMILL: a machine that manufactures by the continuous repetition of some simple action; also, a milling machine: a machine tool on which work usually of metal secured to a carriage is shaped by rotating milling cutters; or a milling cutter, a rotary tool-steel cutter used in a milling machine for shaping and dressing metal surfaces; also, to shape or dress by means of a rotary cutter; also, to cut grooves in the metal surface of (something, such as a knob); also, to mix and condition (something, such as rubber) by passing between rotating rollsMILLED: a machine that manufactures by the continuous repetition of some simple action; also, a milling machine: a machine tool on which work usually of metal secured to a carriage is shaped by rotating milling cutters; or a milling cutter, a rotary tool-steel cutter used in a milling machine for shaping and dressing metal surfaces; also, to shape or dress by means of a rotary cutter; also, to cut grooves in the metal surface of (something, such as a knob); also, to mix and condition (something, such as rubber) by passing between rotating rollsMILLING: a machine that manufactures by the continuous repetition of some simple action; also, a milling machine: a machine tool on which work usually of metal secured to a carriage is shaped by rotating milling cutters; or a milling cutter, a rotary tool-steel cutter used in a milling machine for shaping and dressing metal surfaces; also, to shape or dress by means of a rotary cutter; also, to cut grooves in the metal surface of (something, such as a knob); also, to mix and condition (something, such as rubber) by passing between rotating rollsMOLE: a machine for tunnelingMOTOR: a prime mover, an initial source of motive power (such as a windmill, waterwheel, turbine, or internal combustion engine) designed to receive and modify force and motion as supplied by some natural source and apply them to drive machinery; also, any of various power units that develop energy or impart motion: such as a small compact engine; an internal combustion engine, especially: a gasoline engine; a rotating machine that transforms electrical energy into mechanical energy; also, equipped with or driven by a motorMOUNT: an undercarriage or part on which a device (such as a motor) rests in service; an attachment for an accessory; also, to attach to a supportMOUNTED: an undercarriage or part on which a device (such as a motor) rests in service; an attachment for an accessory; also, to attach to a supportNIPPLE: a small projection through which oil or grease is injected into machinery PILOT: a piece that guides a tool or machine part; also, serving as a guiding or tracing device, an activating or auxiliary unit, or a trial apparatus or operationPINION: a gear with a small number of teeth designed to mesh with a larger wheel or rack; also, the smaller of a pair or the smallest of a train of gear wheelsPITCH: the distance between one point on a gear tooth and the corresponding point on the next tooth; also, the distance from any point on the thread of a screw to the corresponding point on an adjacent thread measured parallel to the axis; also, the theoretical distance a propeller would advance longitudinally in one revolution; the number of teeth or of threads per inchPLAY: to move or function freely within prescribed limits; free or unimpeded motion (as of a part of a machine); also, the length or measure of such motionPOPPET: an upright support or guide of a machine that is fastened at the bottom only; also, a valve that rises perpendicularly to or from its seat [Collins has several other definitions]PORT: an opening (as in a valve seat or valve face) for intake or exhaust of a fluid; also, the area of opening in a cylinder face of a passageway for the working fluid in an engine; also: such a passagewayRACING: to revolve too fast under a diminished load; to speed (an engine) without a working load or with the transmission disengagedRACK: a bar with teeth on one face for gearing with a pinion or worm gear to transform rotary motion to linear motion or vice versa (as in an automobile steering mechanism); also, a notched bar used as a ratchet to engage with a pawl, click, or detent; also, to work by a rack and pinion or worm so as to extend or contract (rack a camera)RUNOUT: Not in M-W; Collins has (in machinery): the gradual termination of a groove on the body of an object not ending there, as the upper termination of a flute in a twist drill; also, a space in a depressed area of an object into which a machine tool or grinding wheel may safely enter at the end of a pass or operation (called back clearance)TAKEOFF: a mechanism for transmission of the power of an engine or vehicle to operate some other mechanismTOOL: a machine for shaping metal: a machine tool; also, the cutting or shaping part in a machine or machine tool; also, to shape, form, or finish with a toolTOOLED: a machine for shaping metal: a machine tool; also, the cutting or shaping part in a machine or machine tool; also, to shape, form, or finish with a toolTOOLROOM*: a room where tools are kept, especially: a room in a machine shop in which tools are made, stored, and issued for use by workersTRAIN: a series of moving mechanical parts (such as gears) that transmit and modify motion (a gear train, drive train)TURN: a lathe, a machine in which work is rotated about a horizontal axis and shaped by a fixed tool; also, to shape especially in a rounded form by applying a cutting tool while revolving in a lathe; also, to operate a latheUNHOOD: to remove the hood, an enclosure or canopy provided with a draft for carrying off fumes, sprays, smokes, or dustsWINDMILL: a mill or machine operated by the wind usually acting on oblique vanes or sails that radiate from a horizontal shaft, especially: a wind-driven water pump or electric generator; also, the wind-driven wheel of a windmillWING: a vane of a windmill or arrowWORKLOAD: the amount of work performed or capable of being performed (as by a mechanical device) usually within a specific period
Ropes, Chains, and Cables not electric or electronic
BEND: a knot by which one rope is fastened to another or to some object; also, to fasten (bend a sail to its yard)BENDING: a knot by which one rope is fastened to another or to some object; also, to fasten (bend a sail to its yard)CABLE: a wire or wire rope by which force is exerted to control or operate a mechanism; a strong rope especially of 10 inches (25 centimeters) or more in circumference; a cable-laid rope; a wire rope or metal chain of great tensile strength; also, to provide with a cable or cables; to make into a cable or into a form resembling a cable; to fasten with or as if with a cableCABLED: a wire or wire rope by which force is exerted to control or operate a mechanism; a strong rope especially of 10 inches (25 centimeters) or more in circumference; a cable-laid rope; a wire rope or metal chain of great tensile strength; also, to provide with a cable or cables; to make into a cable or into a form resembling a cable; to fasten with or as if with a cableCHAIN: a series of usually metal links or rings connected to or fitted into one another and used for various purposes (such as support, restraint, transmission of mechanical power, or measurement); also, something that confines, restrains, or secures; also, to obstruct or protect by a chain; also, to fasten, bind, or connect with or as if with a chainCHAINED: a series of usually metal links or rings connected to or fitted into one another and used for various purposes (such as support, restraint, transmission of mechanical power, or measurement); also, something that confines, restrains, or secures; also, to obstruct or protect by a chain; also, to fasten, bind, or connect with or as if with a chainCHAINING: a series of usually metal links or rings connected to or fitted into one another and used for various purposes (such as support, restraint, transmission of mechanical power, or measurement); also, something that confines, restrains, or secures; also, to obstruct or protect by a chain; also, to fasten, bind, or connect with or as if with a chainENCHAIN: to bind or hold with or as if with chainsENCHAINED: to bind or hold with or as if with chainsENCHAINING: to bind or hold with or as if with chainsHALYARD: a rope or tackle for hoisting and lowering something (such as sails)HITCH: any of various knots used to form a temporary noose in a line or to secure a line temporarily to an objectLAID: to put (strands) in place and twist to form a rope, hawser, or cable; also: to make by putting strands in place and twisting (lay up rope)LANYARD: a piece of rope or line for fastening something in a ship, especially: one of the pieces passing through deadeyes to extend shrouds or staysLARIAT: a long light rope (as of hemp or leather) used with a running noose to catch livestock or with or without the noose to tether grazing animals: a lassoLAYING: to put (strands) in place and twist to form a rope, hawser, or cable; also: to make by putting strands in place and twisting (lay up rope)LEAD: the course of a rope from end to endLIGATE: to tie with a ligatureLIGATING: to tie with a ligatureLINE: a length of cord or cord-like material; a comparatively strong slender cord; also, a rope used on shipboardLINK: a single ring or division of a chainMOOR: to make fast with or as if with cables, lines, or anchors: to anchor; to be made fastMOORING: a place where or an object to which something (such as a craft) can be moored; also, a device (such as a line or chain) by which an object is secured in place; also, to make fast with or as if with cables, lines, or anchors: to anchor; to be made fastPAID: past tense and past participle of pay: to slacken (something, such as a rope) and allow to run out —used with out (paid out the rope as it jerked taut)RACK: to seize (ropes, such as parallel ropes of a tackle) togetherREEVE: to pass (something, such as a rope) through a hole or opening; to fasten by passing through a hole or around something; to pass a rope through; also, of a rope: to pass through a block or similar deviceROPING: to bind, fasten, or tie with a rope or cordROPY: resembling ropeTACKLE: an assemblage of ropes and pulleys arranged to gain mechanical advantage for hoisting and pulling; also, the act or an instance of tackling; also, to attach or secure with or as if with tackleTACKLED: an assemblage of ropes and pulleys arranged to gain mechanical advantage for hoisting and pulling; also, the act or an instance of tackling; also, to attach or secure with or as if with tackleTHIMBLE: a grooved ring of thin metal used to fit in a spliced loop in a rope as protection from chafingTOGGLE: a crosspiece attached to the end of or to a loop in something (such as a chain, rope, line, strap, or belt) usually to prevent slipping, to serve in twisting or tightening, or to hold something attached; also, to furnish with a toggle; to fasten with or as if with a toggleTOWLINE: a towrope, a line used in towing something (such as a boat)TURN: a single round (as of rope passed about an object or of wire wound on a core)UNLAID: to untwist the strands of (unlay a rope); untwistVEER: to let out (something, such as a rope)WALK: a ropewalk, a long covered walk, building, or room where ropes are manufacturedWARP: a rope for warping or mooring a ship or boatWORM: to wind rope or yarn spirally round and between the strands of (a cable or rope) before servingYARN: a continuous often plied strand composed of either natural or synthetic fibers or filaments or another material (such as metal, glass, or plastic)
Tools and Devices not farms, not household
ADAPTOR: M-W: less common variant of adapter, a device for connecting two parts (as of different diameters) of an apparatus; also, one that adaptsAPPLIANCE: a piece of equipment for adapting a tool or machine to a special purposeATTACHMENT: a device attached to a machine or implementATTACHMENT: a device attached to a machine or implementBAFFLE: to check or break the force or flow of by or as if by a baffle; or a device (such as a plate, wall, or screen) to deflect, check, or regulate flow or passage (as of a fluid, light, or sound)BAFFLED: to check or break the force or flow of by or as if by a baffle; or having a device (such as a plate, wall, or screen) to deflect, check, or regulate flow or passage (as of a fluid, light, or sound)BELT: a strip of flexible material worn especially around the waist as a means of carrying something (such as tools); also, a similar article worn as a corset or for protection or safety (a back belt)BEVEL: an instrument consisting of two rules or arms jointed together and opening to any angle for drawing angles or adjusting surfaces to be cut at an angleBINDING: a material or device used to bindBLOCK: a wooden or metal case enclosing one or more pulleys and having a hook, eye, or strap by which it may be attachedBLOCKS: a wooden or metal case enclosing one or more pulleys and having a hook, eye, or strap by which it may be attachedBOBS: plural of bob, a hanging ball or weight (as on a plumb line)BOLT: a metal rod or pin for fastening objects together that usually has a head at one end and a screw thread at the other and is secured by a nut; also, to attach or fasten with bolts BOOT: an enclosing or protective casing or sheath (as for a rifle or over an electrical or mechanical connection)BRAD: a thin nail of the same thickness throughout but tapering in width and having a slight projection at the top of one side instead of a head: a slender wire nail with a small barrel-shaped head; also, to fasten with bradsBURR: a small rotary cutting toolBUTTON: a push buttonCHUCK: an attachment for holding a workpiece or tool in a machine (such as a drill or lathe)CLENCH: to clinch: to turn over or flatten the protruding pointed end of (a driven nail); also: to treat (a screw, a bolt, a rivet, etc.) in a similar way; to fasten in this wayCLENCHED: to clinch: to turn over or flatten the protruding pointed end of (a driven nail); also: to treat (a screw, a bolt, a rivet, etc.) in a similar way; to fasten in this wayCLENCHING: to clinch: to turn over or flatten the protruding pointed end of (a driven nail); also: to treat (a screw, a bolt, a rivet, etc.) in a similar way; to fasten in this wayCLICK: a detent: a device (such as a catch, dog, or spring-operated ball) for positioning and holding one mechanical part in relation to another in a manner such that the device can be released by force applied to one of the parts; also, to turn (something) on or off by pushing a button or moving a switch (click off the light)CLICKED: a detent: a device (such as a catch, dog, or spring-operated ball) for positioning and holding one mechanical part in relation to another in a manner such that the device can be released by force applied to one of the parts; also, to turn (something) on or off by pushing a button or moving a switch (click off the light)CLICKING: a detent: a device (such as a catch, dog, or spring-operated ball) for positioning and holding one mechanical part in relation to another in a manner such that the device can be released by force applied to one of the parts; also, to turn (something) on or off by pushing a button or moving a switch (click off the light)CLINCH: to turn over or flatten the protruding pointed end of (a driven nail); to treat (a screw, a bolt, a rivet, etc.) in a similar way; to fasten in this way; also, a fastening by means of a clinched nail, rivet, or bolt; also: the clinched part of a nail, rivet, or boltCLINCHING: to turn over or flatten the protruding pointed end of (a driven nail); to treat (a screw, a bolt, a rivet, etc.) in a similar way; to fasten in this way; also, a fastening by means of a clinched nail, rivet, or bolt; also: the clinched part of a nail, rivet, or boltCLIP: a 2-bladed instrument for cutting especially the nails; also, something that is clipped; also, an act of clippingCLIPPED: a 2-bladed instrument for cutting especially the nails; also, something that is clipped; also, an act of clippingCLOCKWORK: the inner workings of somethingCLOCKWORK: the inner workings of somethingCOCK: to set (a mechanism, such as a camera shutter) for trippingCOCKED: to set (a mechanism, such as a camera shutter) for trippingCOCKING: to set (a mechanism, such as a camera shutter) for trippingCOLLAR: something resembling a collar in shape or use (such as a ring or round flange to restrain motion or hold something in place)COLLET: a metal band, collar, ferrule, or flangeDEVICE: a piece of equipment or a mechanism designed to serve a special purpose or perform a special functionDEVICE: a piece of equipment or a mechanism designed to serve a special purpose or perform a special functionDIAL: a device that may be operated to make electrical connections or to regulate the operation of a machine; to manipulate a device (such as a dial) so as to operate, regulate, or selectDIALED: to manipulate a device (such as a dial) so as to operate, regulate, or selectDIALING: to manipulate a device (such as a dial) so as to operate, regulate, or selectDOORNAIL: a large-headed nail —used chiefly in the phrase “dead as a doornail”DRAFT: a device for regulating the flow of air (as in a fireplace) (open the draft)DRILL: an instrument with an edged or pointed end for making holes in hard substances by revolving or by a succession of blows; also: a machine for operating such an instrument; also, to bore or drive a hole in; to make by piercing action; to make a hole with a drillENGAGE: to come together and interlock (the gears engaged); also, to interlock with: mesh; also: to cause (mechanical parts) to mesh (engage the clutch)ENGAGED: being in gear: meshed; also, to come together and interlock (the gears engaged); also, to interlock with: mesh; also: to cause (mechanical parts) to mesh (engage the clutch)ENGAGEMENT: the state of being in gear (engagement of the clutch)ENGAGING: to come together and interlock (the gears engaged); also, to interlock with: mesh; also: to cause (mechanical parts) to mesh (engage the clutch)EYEBOLT: a bolt with a looped headFEMALE: designed with a hollow or groove into which a corresponding male part fitsFILE: a tool usually of hardened steel with cutting ridges for forming or smoothing surfaces especially of metalFINDING: findings plural: small tools and supplies used by an artisan (such as a dressmaker, jeweler, or shoemaker)FITTING: a small often standardized part (an electrical fitting)FLOAT: a tool or apparatus for smoothing a surface (as of wet concrete); also, to smooth (something, such as plaster or cement) with a floatFORKLIFT: a self-propelled machine for hoisting and transporting heavy objects by means of steel fingers inserted under the loadGIMLET: a small tool with a screw point, grooved shank, and cross handle for boring holes; also, to pierce as if with a gimletHAND: an indicator or pointer on a dial (the hands of a clock)HAWK: a small board or metal sheet with a handle on the underside used to hold mortarHONE: a whetstone, a stone for whetting edge toolsIMPLEMENT: a device used in the performance of a task: tool, utensil LEVER: a bar used for prying or dislodging something; a rigid piece that transmits and modifies force or motion when forces are applied at two points and it turns about a third, specifically: a rigid bar used to exert a pressure or sustain a weight at one point of its length by the application of a force at a second and turning at a third on a fulcrum; also, a projecting piece by which a mechanism is operated or adjusted; also, to pry, raise, or move with or as if with a lever; to operate (a device) in the manner of a leverMAGNET: a body having the property of attracting iron and producing a magnetic field external to itself; specifically: a mass of iron, steel, or alloy that has this property artificially imparted; from Greek magnēs (lithos), literally, stone of Magnesia, ancient city in Asia MinorMALE: designed with a projecting part for fitting into a corresponding female part (a male hose coupling)MALLET: a hammer with a typically barrel-shaped head: such as a tool with a large head for driving another tool or for striking a surface without marring itMANUAL: a device or apparatus intended for manual operationMAUL: a heavy often wooden-headed hammer used especially for driving wedges; also: a tool like a sledgehammer with one wedge-shaped end that is used to split woodNAIL: a slender usually pointed and headed fastener designed to be pounded in; also, to fasten with or as if with a nailNAILHEAD: the usually flattened boss that forms the end of a nail opposite to the point; also, an ornament suggesting a nailheadNAILING: a slender usually pointed and headed fastener designed to be pounded in; also, to fasten with or as if with a nailNEEDLE: any of various slender hollow devices used to introduce matter (such as air) into or remove it from an object (such as a ball); also, a slender pointed rod controlling a fine inlet or outlet (as in a valve); also, a slender bar of magnetized steel that when allowed to turn freely (as in a compass) indicates the direction of a magnetic field (as of the earth); also, a slender usually sharp-pointed indicator on a dialNULL: used of an instrument: indicating usually by a zero reading on a scale when a given quantity (such as current or voltage) is zero or when two quantities are equal; also, being or relating to a method of measurement in which an unknown quantity (as of electric current) is compared with a known quantity of the same kind and found equal by a null detector; of, being, or relating to zero (The meter gave a null reading.); zero: the point of departure in reckoning, specifically: the point from which the graduation of a scale (as of a thermometer) beginsOILCAN: a can for oil, especially: a spouted can designed to release oil drop by drop (as for lubricating machinery)OILED: to smear, rub over, furnish, or lubricate with oilOILING: to smear, rub over, furnish, or lubricate with oilPACK: a compact unitized assembly to perform a specific functionPADDLE: any of the broad boards at the circumference of a waterwheel (a wheel made to rotate by direct action of water, such as on a mill)PALLET: a wooden flat-bladed instrumentPANEL: a usually vertical mount for controls or dials (as of instruments of measurement) (a control panel)PART: a constituent member of a machine or other apparatus; also: a spare partPAWL: a pivoted tongue or sliding bolt on one part of a machine that is adapted to fall into notches or interdental spaces on another part so as to permit motion in only one directionPEDAL: a foot lever or treadle by which a part is activated in a mechanism; also, (adj.) of, relating to, or involving a pedal; also, to use or work a pedal; to work the pedals ofPEDALED: a foot lever or treadle by which a part is activated in a mechanism; also, (adj.) of, relating to, or involving a pedal; also, to use or work a pedal; to work the pedals ofPEEN: a usually hemispherical or wedge-shaped end of the head of a hammer that is opposite the face and is used especially for bending, shaping, or cutting the material struck; also, to draw, bend, or flatten by or as if by hammering with a peenPENDULUM: a body suspended from a fixed point so as to swing freely to and fro under the action of gravity and commonly used to regulate movements (as of clockwork)PICK: a heavy, usually long-handled iron or steel tool pointed at one or both ends; also, to use or work with a pickPICKED: a heavy, usually long-handled iron or steel tool pointed at one or both ends; also, to use or work with a pickPIKE: a pikestaff, a spiked staff for use on slippery groundPIVOT: a shaft or pin on which something turns; also, (adj.) turning on or as if on a pivot; also, to provide with, mount on, or attach by a pivot (a pivoted mechanism), or to turn on or as if on a pivot, or to cause to pivot (pivoted the camera)PIVOTED: a shaft or pin on which something turns; also, (adj.) turning on or as if on a pivot; also, to provide with, mount on, or attach by a pivot (a pivoted mechanism), or to turn on or as if on a pivot, or to cause to pivot (pivoted the camera)PIVOTING: a shaft or pin on which something turns; also, (adj.) turning on or as if on a pivot; also, to provide with, mount on, or attach by a pivot (a pivoted mechanism), or to turn on or as if on a pivot, or to cause to pivot (pivoted the camera)PLANE: a tool for smoothing or shaping a wood surface; also, to make smooth or even by use of a plane; also, to remove by or as if by planing —often used with away or off; also, to work with a plane; to do the work of a planePLANING: a tool for smoothing or shaping a wood surface; also, to make smooth or even by use of a plane; also, to remove by or as if by planing —often used with away or off; also, to work with a plane; to do the work of a planePOLAR: of or relating to one or more poles (as of a magnet)POLE: one of two or more regions in a magnetized body at which the magnetic flux density is concentratedPOLL: the broad or flat end of a striking tool (such as a hammer)PROP: a propellor, one that propels; especially: a device that consists of a central hub with radiating blades placed and twisted so that each forms part of a helical surface and that is used to propel a vehicle (such as a ship or airplane)PULLEY: a sheave or small wheel with a grooved rim and with or without the block in which it runs used singly with a rope or chain to change the direction and point of application of a pulling force and in various combinations to increase the applied force especially for lifting weights; also, a pulley or pulleys with ropes to form a tackle that constitutes one of the simple machines; also, a wheel used to transmit power by means of a band, belt, cord, rope, or chain passing over its rimPUMP: a device that raises, transfers, delivers, or compresses fluids or that attenuates gases especially by suction or pressure or both; also, an act or the process of pumping; also, to work a pump: to raise or move a fluid with a pump; also, to raise (something, such as water) with a pump; also, to draw fluid from with a pump; also, to operate by manipulating a leverPUMPED: a device that raises, transfers, delivers, or compresses fluids or that attenuates gases especially by suction or pressure or both; also, an act or the process of pumping; also, to work a pump: to raise or move a fluid with a pump; also, to raise (something, such as water) with a pump; also, to draw fluid from with a pump; also, to operate by manipulating a leverPUMPING: a device that raises, transfers, delivers, or compresses fluids or that attenuates gases especially by suction or pressure or both; also, an act or the process of pumping; also, to work a pump: to raise or move a fluid with a pump; also, to raise (something, such as water) with a pump; also, to draw fluid from with a pump; also, to operate by manipulating a leverQUADRANT: a device or mechanical part shaped like or suggestive of the quadrant of a circleQUILL: a hollow shaft often surrounding another shaft and used in various mechanical devicesRACK: a framework, stand, or grating on or in which articles are placed (a drying rack); also, to work or treat (material) on a rack (rack the onions after harvesting for drying)ROBOT: a machine that resembles a living creature in being capable of moving independently (as by walking or rolling on wheels) and performing complex actions (such as grasping and moving objects); often: such a machine built to resemble a human being or animal in appearance and behavior; also, a device that automatically performs complicated, often repetitive tasks (as in an industrial assembly line); also, a mechanism guided by automatic controls (a robot airplane)ROBOTIC: of or relating to mechanical robots; having the characteristics of a robotROLL: something that performs a rolling action or movement: a rollerROTARY: a rotary machine; also, having an important part that turns on an axis (rotary cutter)ROTOR: a part that revolves in a stationary part (a brake rotor); the rotating member of an electrical machineROUND: a rung of a ladder or a chairRUNG: one of the crosspieces of a ladder; also, a spoke of a wheelTACKLE: a set of the equipment used in a particular activity: gearTAMP: a tamper, a tool for tamping; also, to tamp, to drive in or down by a succession of light or medium blows (tamp wet concrete)TEAT: a small projection or a nib (as on a mechanical part)TEETH: any of the regular projections on the circumference or sometimes the face of a wheel that engage with corresponding projections on another wheel especially to transmit force: a cogTELLTALE: a device for indicating or recording somethingTEMPLATE: a gauge, pattern, or mold (such as a thin plate or board) used as a guide to the form of a piece being made; also, something that establishes or serves as a patternTHING: things plural: equipment or utensils especially for a particular purpose (bring the tea things, get your fishing things, where are the things to repair this door)THROW: the extreme movement given to a pivoted or reciprocating piece by a cam, crank, or eccentric: a stroke; also, the length of the radius of a crank or the virtual crank radius of an eccentric or cam; also, to move (a lever) so as to connect or disconnect parts of a clutch or switch; also: to make or break (a connection) with a leverTHROWN: the extreme movement given to a pivoted or reciprocating piece by a cam, crank, or eccentric: a stroke; also, the length of the radius of a crank or the virtual crank radius of an eccentric or cam; also, to move (a lever) so as to connect or disconnect parts of a clutch or switch; also: to make or break (a connection) with a leverTOGGLE: a device consisting of two bars jointed together end to end but not in line so that when a force is applied to the joint tending to straighten it pressure will be exerted on the parts adjacent or fixed to the outer ends of the bars; also: a device with a joint using a toggle; also, to furnish with a toggle; to fasten with or as if with a toggleTONGUE: a movable pin in a buckle; also, a feather: a projecting strip, rib, fin, or flangeTOOL: a handheld device that aids in accomplishing a task; also, to shape, form, or finish with a tool, especially: to letter or ornament (something, such as leather or gold) by means of hand toolsTOOLED: a handheld device that aids in accomplishing a task; also, to shape, form, or finish with a tool, especially: to letter or ornament (something, such as leather or gold) by means of hand toolsTOOLKIT: M-W has tool kit, a set of tools; Collins has toolkit, a set of tools, typically when carried in a single container; also, 2. a collection of software routines that together serve a specific purposeTOOLROOM*: a room where tools are kept, especially: a room in a machine shop in which tools are made, stored, and issued for use by workersTOOTH: any of the regular projections on the circumference or sometimes the face of a wheel that engage with corresponding projections on another wheel especially to transmit force: a cogTOOTHED: having teeth especially of a specified kind or number —often used in combination (fine-toothed)TORCH: any of various portable devices for emitting an unusually hot flame [e.g., a blowtorch]TRACK: a usually metal way (such as a groove) serving as a guide (as for a movable lighting fixture)TRIP: a device for tripping a mechanism (such as a catch or detent); also, the action of tripping mechanically; also, to actuate a mechanism; to become operative; also, to release or operate (a mechanism) especially by releasing a catch or detent (trip the fire alarm)TURBO: a turbine, a rotary engine actuated by the reaction or impulse or both of a current of fluid (such as water, steam, or air) subject to pressure and usually made with a series of curved vanes on a central rotating spindle; also, [by shortening]: a turbocharger, a centrifugal blower driven by exhaust gas turbines and used to supercharge an engineTURN: to affect or alter the functioning of (something, such as a mechanical device) or the level of (something, such as sound) by such movement (turn the oven to 400°, turn the volume up/down, turned the lights on/off, turn the music to full volumeUNION: any of various devices for connecting parts (as of a machine), especially: a coupling for pipes or pipes and fittingsUNIT: a piece or complex of apparatus serving to perform one particular function (an air conditioning unit)VALVE: any of numerous mechanical devices by which the flow of liquid, gas, or loose material in bulk may be started, stopped, or regulated by a movable part that opens, shuts, or partially obstructs one or more ports or passageways; also: the movable part of such a deviceVANE: a thin flat or curved object that is rotated about an axis by a flow of fluid [or air] or that rotates to cause a fluid [or air] to flow or that redirects a flow of fluid [or air] (the vanes of a windmill)VIBRATOR: one that vibrates or causes vibration: such as a vibrating device (as in an electric bell or buzzer)WEBBED: [having or resembling a web,] a thin metal sheet, plate, or strip; also, [having or resembling a web,] the arm of a crankWEDGE: a piece of a substance (such as wood or iron) that tapers to a thin edge and is used for splitting wood and rocks, raising heavy bodies, or for tightening by being driven into something; also, to fasten or tighten by driving in a wedge; to separate or force apart with or as if with a wedgeWEDGED: a piece of a substance (such as wood or iron) that tapers to a thin edge and is used for splitting wood and rocks, raising heavy bodies, or for tightening by being driven into something; also, to fasten or tighten by driving in a wedge; to separate or force apart with or as if with a wedgeWEDGING: a piece of a substance (such as wood or iron) that tapers to a thin edge and is used for splitting wood and rocks, raising heavy bodies, or for tightening by being driven into something; also, to fasten or tighten by driving in a wedge; to separate or force apart with or as if with a wedgeWHEEL: a circular frame of hard material that may be solid, partly solid, or spoked and that is capable of turning on an axle; also, a contrivance or apparatus having as its principal part a wheelWIDGET: a gadget, an often small mechanical or electronic device with a practical use but often thought of as a novelty; WINCH: any of various machines or instruments for hauling or pulling, especially: a powerful machine with one or more drums on which to coil a rope, cable, or chain for hauling or hoisting: windlass; also, a crank with a handle for giving motion to a machine (such as a grindstone)WIND: a mechanism (such as a winch) for winding; also, an act of winding: the state of being wound; also, to crank; to hoist or haul by means of a rope or chain and a windlass, any of various machines for hoisting or haulingWINDING: a mechanism (such as a winch) for winding; also, an act of winding: the state of being wound; also, to crank; to hoist or haul by means of a rope or chain and a windlass, any of various machines for hoisting or haulingWORK: works plural: the working or moving parts of a mechanism (the works of a clock)WORM: something (such as a mechanical device) spiral or vermiculate in form or appearance: such as the thread of a screw; also, a short revolving screw whose threads gear with the teeth of a worm wheel or a rack; also, Archimedes' screw, a device made of a tube bent spirally around an axis or of a broad-threaded screw encased by a cylinder and used to raise water; also, a conveyor working on the principle of such a screwWOUND: a mechanism (such as a winch) for winding; also, an act of winding: the state of being wound; also, to crank; to hoist or haul by means of a rope or chain and a windlass, any of various machines for hoisting or haulingTURNOUT: equipment, rig; the set of articles or physical resources serving to equip a person or thing
Unfastening, Loosening, Detaching, Removing not enclosures
BEAT: to dislodge by repeated hitting (e.g., to beat dust from the carpet) BEATEN: to dislodge by repeated hitting (e.g., to beat dust from the carpet) FORCING: to break open or through (force a lock)PEEL: to strip off an outer layer of (peel an orange); to remove by stripping (peel the label off the can); to lose an outer layer (as of skin) (His face is peeling.); to come off in sheets or scales (The paint is peeling.)PEELED: to strip off an outer layer of (peel an orange); to remove by stripping (peel the label off the can); to lose an outer layer (as of skin) (His face is peeling.); to come off in sheets or scales (The paint is peeling.)POPPED: to escape or break away from something (such as a point of attachment) usually suddenly or unexpectedly (The lid keeps popping off of the container.)POPPING: to escape or break away from something (such as a point of attachment) usually suddenly or unexpectedly (The lid keeps popping off of the container.)RIPPING: to remove quickly or violently (ripped the poster off the wall)RUNNING: to ravel lengthwise (tights guaranteed not to run)TAKEOFF: an action of removing somethingUNBELT: to remove (as a sword) by removing a beltUNBEND: to cast loose: to untie (unbend a rope)UNBENT: to cast loose: to untie (unbend a rope)UNBIND: to remove a band from: to free from fastenings: to untie, unfastenUNBINDING: to remove a band from: to free from fastenings: to untie, unfastenUNBOUND: not bound: not fastened; to remove a band from: to free from fastenings: to untie, unfastenUNBUCKLE: to loose the buckle of: unfastenUNCLENCH: to open from a clenched position; to release from a grip: to become unclasped or relaxedUNCLENCHED: to open from a clenched position; to release from a grip: to become unclasped or relaxedUNCLUTCH: to unclench, to open from a clenched position; to release from a grip: to become unclasped or relaxedUNDID: to open or loosen by releasing a fastening (undid her jacket); also, to come open or apartUNDO: to open or loosen by releasing a fastening (undid her jacket); also, to come open or apartUNDOCK: uncouple (undock the shuttle from the space station)UNDOCKED: uncouple (undock the shuttle from the space station)UNDOING: an act of loosening: unfastening; also, to open or loosen by releasing a fastening (undid her jacket); also, to come open or apartUNDONE: not fastened or tied (My shoelace is undone.); also, to open or loosen by releasing a fastening (undid her jacket); also, to come open or apartUNGLUE: to separate by or as if by dissolving an adhesiveUNGLUED: to separate by or as if by dissolving an adhesiveUNHAND: old-fashioned + literary: to remove the hand from: let go (Unhand me, sir!)UNHANDED: old-fashioned + literary: to remove the hand from: let go (Unhand me, sir!)UNHANG: to detach from a hanging support (unhang a mirror from the wall)UNHANGING: to detach from a hanging support (unhang a mirror from the wall)UNHINGE: to remove from the hinges (unhinge a door)UNHINGED: to remove from the hinges (unhinge a door)UNHINGING: to remove from the hinges (unhinge a door)UNHUNG: not hung, especially: not executed by hangingUNLINK: to unfasten the links of: to separate, disconnect; to become detachedUNLINKING: to unfasten the links of: to separate, disconnect; to become detachedUNLOCK: to unfasten the lock of: open the lock on (Can you unlock the car for me?) also, to become unfastened or freed from restraintsUNMOOR: to loosen from or as if from moorings (unmoored from reality) UNMOORING: to loosen from or as if from moorings (unmoored from reality) UNPEG: to remove a peg from; to unfasten by or as if by removing a pegUNPEGGING: to remove a peg from; to unfasten by or as if by removing a pegUNPIN: to remove a pin from; to loosen, free, or unfasten by or as if by removing a pinUNPINNED: to remove a pin from; to loosen, free, or unfasten by or as if by removing a pinUNPINNING: to remove a pin from; to loosen, free, or unfasten by or as if by removing a pinUNTIE: to free from something that ties, fastens, or restrains : unbind (untied our hands); also, to become loosened or unboundUNTIED: to free from something that ties, fastens, or restrains : unbind (untied our hands); also, to become loosened or unboundUNTUCK: to release from a tuck or from being tucked upUNTUCKED: to release from a tuck or from being tucked upUNTYING: to free from something that ties, fastens, or restrains : unbind (untied our hands); also, to become loosened or unboundUNWOUND: to free from or as if from a binding or wrapping VEER: to let out (something, such as a rope)
Spelling Bee words related to MACHINES, TOOLS, AND DEVICES
ACTIONACTUATEACTUATORADAPTORAGITATORALLOWANCEAPPLIANCEARBORATTACHMENTBAFFLEBAFFLEDBARRINGBEAMBEATBEATENBELTBELTINGBENCHBENDBENDINGBEVELBINDBINDINGBLOCKBLOCKSBOBSBOLT BOOTBOSSBOUNDBOWLBRADBUCKLEBUNDLINGBURRBUTTONCABLECABLEDCATCHCHAINCHAINEDCHAININGCHUCKCINCHCINCHEDCINCHINGCLENCHCLENCHEDCLENCHINGCLICKCLICKEDCLICKINGCLINCHCLINCHINGCLIPCLIPPABLECLIPPEDCLOCKWORKCLUTCHCLUTCHEDCOCKCOCKEDCOCKINGCOGWHEELCOLLARCOLLETCONTROLCRAMPDEVICEDIALDIALEDDIALINGDOGGEDDOGGINGDOORKNOBDOORNAILDRAFTDRILLDROPENCHAINENCHAINEDENCHAININGENGAGEENGAGEDENGAGEMENTENGAGINGENGINEEYEBOLTFACEPLATEFEMALEFILEFINDINGFIRMFIRMINGFIRMLYFITTINGFIXEDFLOATFOBS FORCINGFORKLIFTGALLGALLEDGALLINGGANTRYGIMLETGLANDGUARDHALYARDHANDHAWKHEADHINGEHINGEDHINGINGHITCHHITTINGHONEHOODHUNTHUNTEDIMPLEMENTJIGGINGJOURNALKNOBLAIDLANYARDLARIATLATCHLATHELATHEDLATHINGLAYINGLEADLEAF LEVERLIGATELIGATINGLINELINKLIVELOCKLOCKABLELOCKEDLOCKUPLOOPLOOPINGLUFFLUFFSMACHINEMAGNETMALEMALLETMANUALMAULMILLMILLEDMILLINGMOLEMOORMOORMOORINGMOTORMOUNTMOUNTEDNAILNAILHEADNAILINGNEEDLENIPPLENULLOILCANOILEDOILING
PACKPADDLEPADLOCKPAIDPALLETPANELPARTPAWLPEDALPEDALEDPEELPEELEDPEENPEGGEDPEGGINGPENDULUMPICKPICKEDPIKEPILOTPINIONPINNEDPINNINGPITCHPIVOTPIVOTEDPIVOTINGPLANEPLANINGPLAYPOLARPOLEPOLLPOPPEDPOPPETPOPPINGPORTPROPPULLPULLEYPUMPPUMPEDPUMPINGQUADRANTQUILLRACINGRACK REEVERINGRINGINGRIPPINGROBOTROBOTICROLLROPINGROPYROTARYROTORROUND ROVERUNGRUNNINGRUNOUTTACKTACKEDTACKINGTACKLETACKLEDTAKEOFFTALONTAMPTAPPEDTAPPINGTEATTEETHTELLTALETEMPLATETHIMBLETHINGTHOLE*THROWTHROWNTIEDTOEDTOGGLETONGUETOOLTOOLEDTOOLKITTOOLROOM*TOOTHTOOTHEDTORCHTOWLINETRACKTRAINTRIPTUCKTUCKEDTURBOTURNTURNOUTTYINGUNBARUNBELTUNBENDUNBENTUNBINDUNBINDINGUNBOUNDUNBUCKLEUNCLENCHUNCLENCHEDUNCLUTCHUNDIDUNDOUNDOCKUNDOCKEDUNDOINGUNDONEUNGLUEUNGLUEDUNHANDUNHANDEDUNHANGUNHANGINGUNHINGEUNHINGEDUNHINGINGUNHOODUNHUNGUNIONUNITUNLAIDUNLATCHUNLINKUNLINKINGUNLOCKUNMOORUNMOORINGUNPEGUNPEGGINGUNPINUNPINNEDUNPINNINGUNTIEUNTIEDUNTUCKUNTUCKEDUNTYINGUNWOUNDVALVEVANE VEERVIBRATORWALKWARDWARPWEBBEDWEDGEWEDGEDWEDGINGWHEELWHIPWHIPPINGWIDGETWINCHWINDWINDINGWINDINGWINDMILLWINGWORKWORKLOADWORMWOUNDYARN
LexiConnexxions New York Times Spelling Bee answers analysis statistics peregrine
If you cite information from LexiConnexxions, please give credit and a link to the relevant page. These reports and analyses are conceived, compiled, designed, and prepared by a human being, not a machine. This website is 100% AI-free; it is conceived, designed, written, and maintained by a human being. Except where noted, all content ©2022-2026 and in perpetuity by LexiConnexxions. All rights reserved. Dissemination, re-use, or duplication by any means, for any purpose whatsoever, is prohibited except by express written permission of LexiConnexxions. This site is not affiliated with The New York Times or with any other sites related to the New York Times Spelling Bee. Contact LexiConnexxions at info // @ // lexiconnexxions.com.